Acewell ACE-2853
Acewell ACE-2853
In stock
Motorcycle speedometer with LED indicator lights, tachometer, gear shift warning, fuel gauge and road approval (ABE). The round instrument is available with an aluminum housing (polished & matt black) or without a housing.
range of functions
The Acewell ACE-2853 motorcycle speedometer with LED indicator lights is suitable for road use (ABE) and is available with both an aluminum housing and a plastic housing:
- Analog and digital display of bar graph - tachometer
- digital speed display up to 299.9 km/h
- bar graph - fuel gauge
- Digital display of:
- 2 trip odometer TRIP
- total mileage
- time
- display average and maximum speed
- Display average and maximum speed
- travel time
- operating hour meter
- Warning LED for speed freely adjustable ( shift warning )
- LCD display with two digital lines and analog bar graph - tachometer with blue backlight
- Voltage-free storage of all data
- When the ignition is off, the time is displayed
- Adjustable wheel circumference for all wheel types: adjustment range 1-3999 mm
- Reduction of speed from the original sensor possible.
- Display in kilometers or miles - switchable
- Extremely water, vibration and shock resistant (vibrations 8G, shock 100G tested)
- E-certified
- ABE available
The Acewell ACE-2853 instrument has the following indicator lamp layout
What is the difference between the ACE-2866 and the ACE-2853?
The difference between the devices lies in the layout of the indicator lights.
For comparison: The sister model ACE-2866 has the following indicator light layout:
scope of delivery
- speed sensor with magnet
- fastening material
- Cable set with waterproof connectors and shrink tubing
- German installation instructions with circuit diagram
specifications
functions | specifications | interval | accuracy |
---|---|---|---|
bar tachometer | 500-11,000 rpm | 500 rpm | |
Digital tachometer | 100-19,900 rpm | 100 rpm | |
shift warning | 100-19,900 rpm | 100 rpm | |
maximum speed | 100-19,900 rpm | 100 rpm | |
speedometer | 2.3-300 km/h | 0.1 km/h | ±1% |
top speed | 2.3-300 km/h | 0.1 km/h | ±1% or |
daily kilometers 1&2 | 0 - 999.9 km | 0.1 km | ±0.1% |
total kilometers | 0 - 999999 Km | 1 km or mile | ±0.1% |
travel time | 0:00'00'' - 99:59'59'' | 1 second | ± PPM |
total time | 0:00' - 9999:59' | 1 minute |
±50PPM |
time | 0:00'00'' - 23:59'59'' | 1 second/1 minute | ±50PPM |
fuel gauge | +/- 0-100,250,510 Ohm or off. | 7 bar display | ±1% |
Supply voltage: | 12V DC voltage. |
Speed sensor: | Non-contact magnetic sensor. |
Tachometer input signal: | CDI or ignition coil. |
Wheel circumference adjustment: | 1mm - 3999mm (1mm increments) |
Operating temperature: | -10°C. - +80°C. (inside the housing) |
Storage temperature: | -25°C. - +85°C. (inside the housing) |
Level sensor resistance: | 100 ohms |
Mass: |
Outer diameter of ACE-2853 series: 72mm ring and bore 64.5mm x 40.0mm installation depth |
Outer diameter of ACE-2853AP/AS series (aluminum housing): 70.0mm x 57.5mm deep |
Weight: 140 grams and 200 grams (aluminum housing) |
Power consumption: |
Power consumption clock 0.075mA (running time on a 5Ah motorcycle battery over 10 years) |
Power consumption switched on 27 mA |
Power consumption with 6 indicator lights maximum 100 mA |
All settings, time and odometers remain intact when the power is off, with the exception of the clock. This means that operation on battery-free motorcycles with a direct current supply is also possible. The clock can be operated with a 9V block battery.
Die Anleitung zum programmieren könnte überarbeitet werden zum besseren Verständnis ( alte Km eingeben. Tacho einstellen) Ist mit zwei Knöpfen nicht so leicht. Da auch die Schrift sehr klein ist
Sehr gut
Gibt nichts besseres
Top Produkt
Zusammen mit Bep gekauft, wurde bereits verkabelt geliefert. Einfach nur perfekt.